DL1L Series

LED Lighter for direct illumination in linear camera applications. In this lighting technique the light source is intalled on the same side of camera. The use of different angle of incidence allow to obtain the desired effect on the observed object. This series of LED lighter can be implemented with length up to 3000 mm without discontinuities of lighting. This series is designed with last generation LED able to provide high brightness, low consumption and very high lifetime. Is possible to choose between many dimensions, shapes and different colors ( wavelength ). Are available special LED lighter with diffusers and custom light beam angle. For more informations and technical data about this product please refer to our datasheet.

Introduction

RODER Electronics presents the new DL1 LINEAR series of LED lighters for direct illumination in machine vision applications, manual inspection, microscopes, optical equipment and general lighting.

This series is designed with last generation LED, able to provide high brightness, low consumption, high light output and an average lifetime of over 100,000 hours (equal to 11 years with continued use, or 15-16 years with intermittent use).

Is possible to choose between different sizes (length up to 3000 mm) and different wavelengths. Custom versions are also available with special features and custom configurations.

The DL1 LINEAR series enclosure is made in anodized aluminium, this features ensures a good aesthetic finish and a high heat dissipation from the LEDs and from electronic control circuits. The DL1 LINEAR series is indicated for OEMs and System Integrators that use LED lighters integrated into complex systems or special equipment .

The cable connector allows quick and easy disconnection from the supply for maintenance or cleaning.

The use of technology HTTM (High Thermal Transmission Material - RODER Electronics Trademark) provides high heat dissipation, good colour stability and long operational life.

All DL1 LINEAR led lighters integrate the drivers for the stabilization of the LED current and allow to operate with 24 Vdc power supply directly, while maintaining constant light output and ensuring a high homogeneity of the light emission matrix.

The small size of the lighter ensures to fit it in compact machines and automatic production machines.

Datasheets

For more technical informations about DL1L series LED Lighters please download the following datasheets .....

Drawing

Please Contact our technical office for more informations and for have the DXF files .....

Accessories

Are available these accessories :

Voltage Power supply for DIN rail and for laboratory.....

Cables and connectors for industrial and laboratory applications .....

Diffusers semi-transparent and opal .....

Filter for all optics and camera .....

Mechanicals for fixing and regulation the position of LED lighter .....

Custom applications

Are available custom models for special applications.

For more informations about special models please contact our technical department for more informations.