BL2 Series

LED Lighter for backlight applications. In this model the LEDs are arranged on a matrix to produce high uniformity light. Major applications are similar to standard diffuse back light but this model has a very high brightness and is ideal for high speed inspections or to check contaminat on semitransparent object. Suitable for inspection of dimension and shape in high speed applications.

Introduction

RODER Electronics presents the new BL2 series of LED lighters for direct illumination in machine vision applications, manual inspection, microscopes, optical equipment and general lighting.

This series is designed with last generation LED, able to provide high brightness, low consumption, high light output and an average lifetime of over 100,000 hours (equal to 11 years with continued use, or 15-16 years with intermittent use).

Is possible to choose between different sizes (20 different sizes and configurations available) and different wavelengths. Custom versions are also available with special features and custom configurations.

The BL2 series enclosure is made in anodized aluminium, derived from a single block of material, this features ensures a good aesthetic finish and a high heat dissipation from the LEDs and from electronic control circuits. The protection of the optics is done with a plastic glass in polycarbonate with anti-scratch and anti-aging, removable and replaceable in case of damage.

The cable connector allows quick and easy disconnection from the supply for maintenance or cleaning.

The use of technology HTTM (High Thermal Transmission Material - RODER Electronics Trademark) provides high heat dissipation, good colour stability and long operational life.

All BL2 led lighters integrate the drivers for the stabilization of the LED current and allow to operate with 24 Vdc power supply directly, while maintaining constant light output and ensuring a high homogeneity of the light emission matrix.

The small size of the lighter ensures to fit it in compact machines and automatic production machines.

Datasheets

For more technical informations about BL2 series LED Lighters please download the following datasheets .....

Drawing

Please Contact our technical office for more informations and for have the DXF files .....

Accessories

Are available these accessories :

Voltage Power supply for DIN rail and for laboratory.....

Cables and connectors for industrial and laboratory applications .....

Diffusers semi-transparent and opal .....

Filter for all optics and camera .....

Mechanicals for fixing and regulation the position of LED lighter .....

Custom applications

Are available custom models for special applications.

For more informations about special models please contact our technical department for more informations.